Description
Everedge Classic Lawn Edging is an easy to install, maintenance free, permanent resolution to the age-old headache of maintaining neat edges for your lawn, driveways, path edging, flower and vegetable beds. It can also be used in a variety of soil conditions. Manufactured from galvanised steel with a heavy plastic coating, this edging will not rust and is guaranteed for 10-15 years.
Very easy to install, as individual strips simply slot together and can be fixed into the ground with any regular mallet.
Dimensions: 1m x 7.5cm high
Height of spikes: 9.5cm
Quantity: 5 pieces
Product thickness: 1.6mm
Due to the overlap you will get 4.75 metres per pack.
EverEdge overlaps and interlocks. Please remember to add 6% to your actual requirement (that is 6cm per metre of EverEdge you use)
How To Install Your Everedge Lawn Edging
- Step 1: Form a new edge or re-cut the existing edge deeper - effectively make a trench for the Everedge.
- Step 2: Place Everedge in position; moving the spikes from side to side in the soils helps to seat it well.Ensure the new piece being installed has the male section locking into the female.
- Step 3: Using a rubber mallet or hammer on a block of wood, drive the Everedge into the ground until the edge is flush with the turf level.
- Step 4: Interlock the overlap
- Step 5: When all your edging is installed, press in the tongue using a screwdriver. Only push to about 45 degrees
- Step 6: Using either another piece of Everedge edging, or a length of timber, Everedge can be bent to the required angle before installing.
Please see extra images for a larger version of the step-by-step images.
Customer note: All the different heights of Everedge Lawn Edging are compatible. The join is always the same height from the top edge so the tops of all sizes will remain flush when put together
Please click here for more ideas from our Lawn Edging Department.
Advisory
Due to the overlap you will get 4.75 metres per pack.
EverEdge overlaps and interlocks. Please remember to add 6% to your actual requirement (that is 6cm per metre of EverEdge you use)
Ask A Question
Q & A
Q: Is galvanised the same as corten?
A: No Corten steel and galvanised steel are different. Galvanised steel has a zinc coating to protect the metal from rusting. Corten steel forms a stable rust-like appearance as if exposed to the weather in order to form a protective coating.
Q: What is the finish on the non galvanised everedge?
A: They all have a matt finish with e-coating, for our customers information: e-coating is considered to be a “wet” process, a spray gun is used to electrostatically apply the particles onto the surface of the substrate.
Q: How many of the lengths of everedge are in a pack
A: The pack contains 5 of 1 meter lengths.
Q: I have a shed with slate around the border of it. I would like to use your edging between the slate and the grass lawn. It would obviously need to be able to go round the corners. Does your product bend for this purpose?
A: Yes, they''re made of steel, so they will bend and hold shape.
Q: Does the height include the spikes?
A: No, the height of the edging is above the ground measurement, the height of the spikes are 9.5cm below the ground.
Q: Can this be used with artificial turf?
A: Everedge have a specific edging for artificial grass, EverEdge Atlas for Artificial Grass