Manufactured from galvanised steel with a heavy plastic coating, this edging will not rust and is guaranteed for 10-15 years.

Containing five x 1 metre long pieces with six spikes per piece to give you plenty of options as to where you feel it will enhance your garden best. It can be overlapped or cut but you are advised to touch up the ends with hammerite.Being made of steel, the edging is strong yet also thin enough to easily bend into shape.

Available in a brown or slate finish, this looks great straight or curved in any style of garden, ranging from sleek town gardens to quaint country gardens.

Dimensions: 1000 x 1.6 x 75mm high
Height of spikes: 9.5cm
Quantity: 5 pieces

This Classic Lawn Edging is available in brown or slate colour, please choose below;

How To Install Your Everedge Lawn Edging

Step 1: Form a new edge or re-cut the existing edge deeper - effectively make a trench for the Everedge.
Step 2: Place Everedge in position; moving the spikes from side to side in the soils helps to seat it well. Ensure the Everedge logo is facing the front and that the new piece being installed has the male section locking into the female.
Step 3: Using a rubber mallet or hammer on a block of wood, drive the Everedge into the ground untill the edge is flush with the turf level.
Step 4: Interlock the overlap
Step 5: When all your edging is installed, press in the tongue using a screwdriver. Only push to about 45 degrees
Step 6: Using either another piece of Everedge edging, or a length of timber, Everedge can be bent to the required angle before installing.

Please see extra images for a larger version of the step-by-step images.

PLEASE NOTE: If you have a BULK/TRADE enquiry, please contact us for a discount on 0845 345 0728